Posts Tagged ‘prefab house’

Prefab House Prices vs. Build to Suit Prices

Sunday, August 1st, 2010

If you’ve ever dealt with a contractor, you know they work in estimates. These estimates, of course, almost always run over when the job is actually taken. This isn’t because of dishonesty. Most of the time, it’s impossible to budget an estimate exactly because of the many variables involved in construction. Where homes that are built to the owner’s specifications are concerned, these variables are numerous. Prefab house prices, by comparison, are much more affordable and the prices are very stable. The reasons for this start at the factory and extend all the way to the eventual erecting of the home.

Where homes that are built from original designs are concerned, the variables start with the plans themselves. Not all plans are well thought out and, in some cases, there are flaws in them that don’t become apparent until the actual construction process. When this happens, cost overruns are inevitable. Not only this, but the exact quantities of materials needed is always something of an unknown. While contractors may make solid estimates, some materials will be lost to the weather and others will simply prove to be faulty in one regard or another.

Prefab house prices are set from the start. When you deal with a contractor, you only have the estimated price of the home to work from. This means that, until the entire home is finished, you cannot be certain of the price. Because of this, building from original plans is oftentimes unworkable for those who are considering their first home. For those who want another option, going with prefabricated homes oftentimes provides a very good choice that is far more affordable than the other options on the market. This means that a custom home is a realistic and affordable option for most anyone.

Popularity: 11% [?]

  • Share/Bookmark

Prefab Green Housing Options

Sunday, August 1st, 2010

Prefab green housing is one of the most affordable ways to go about constructing an environmentally-sound home. These homes arrive with the framing elements–walls, floor joists and so forth–already assembled. This means that it’s possible to have them transported anywhere a truck can go, on or off the grid, and to get your home set up in minimal time. The framing portion of the construction goes by very fast, enabling the remainder to be done within a sheltered environment.

The shelter advantage stretches to the facility where the houses are constructed, as well. Prefab green housing is put together in a controlled environment. This means that no materials are wasted due to weather damage. It also means that, because the plans are well-established and their method of construction is a procedure, there is no waste from having materials ordered in too great a quantity. Some of the firms who design and build these houses also use wood from sustainable crops, rather than using exotic or old-growth wood and all of the environmental damage those materials entail. For those who care about the environment, this has obvious advantages.

Prefab green housing also has one more distinct advantage: efficiency. Because the designs that these homes are built from are established ones that have proven workable over and over again, they’re also constantly improved and fit together in the most important ways. The tight fit of all the walls and windows mean that very little heat is lost to gaps and spaces. These homes come with passages for ductwork and other important home systems included, which eliminates another potential source of inefficient design and construction. All of this together makes these very green choices all around, as well as increasingly popular choices with homeowners.

Popularity: 4% [?]

  • Share/Bookmark

Is a Pre Fab House a Good Option?

Sunday, August 1st, 2010

A pre fab house is one of the many options available to new homeowners. Among the entire range of options are building to suit, buying a standing home and constructing your own home from scratch. The latter option, of course, is only realistic for those with high-level carpentry skills. Buying a standing home is only suitable for those who aren’t looking for new housing, of course, and there is always the gamble that problems will manifest with the home soon after the purchase that could not have been caught by an inspector or an appraiser.

A pre fab house can be bought in a much wider variety of designs than was the case even a decade ago. Because people are looking for efficient, affordable ways to get into a new house, this option is increasingly popular. That popularity translates to more designs being developed and, thus, a wider range of options for those who want something that they can call their own without reinventing the wheel at every step of the construction process. In the case of a pre fab house, the construction process is a very efficient one.

Prefabricated houses are made in workspaces that are sheltered from the elements. This means that the raw materials that make up the house aren’t subjected to the elements and that there aren’t unknown variables at play with the quality of those materials. When a house is built in this way, it also means that the structure is designed in a way that comes from years of experience and that all the parts fit together exactly as intended, every time. This reliability is one of the most compelling of a host of reasons to consider going prefabricated with a new home.

Popularity: 4% [?]

  • Share/Bookmark

Prefab House Prices Save You Money

Friday, July 9th, 2010

Building a home is not exactly something that most people equate with affordability.  Hiring a contractor, paying for labor and the construction materials themselves can all cost a considerable amount of money.  However, it does not need to be this way.  For instance, prefab house prices can save you a ton of money over what you will pay for traditional home construction.

How, exactly, are prebuilt homes able to save you so much money?  They do this through a variety of different ways.  For instance, you will save money on construction materials.  Prebuilt homes are assembled in sections in a factory.  Therefore, only the lumber that actually goes into the construction of your home is paid for.  The left over lumber is used in other construction projects, rather than being taken to a landfill or burned as scraps.  This cuts down on construction costs.

Another way that prefab house prices will help you save in the end is in the time required to complete construction.  For example, a traditional home might take several months to build, since each wall has to be assembled by hand, before the roof can begin being built.  With a prebuilt home, however, the walls are already assembled.  You simply move them in and attach them to the structure.  This means that you can get all of the home under the roof as quickly as possible, and out of the weather.

Prefab home prices are very reasonable and you will actually find that you save more money than you might think.  When compared to the costs of a traditional home, prefab prices are down right cheap.  Of course, you don’t sacrifice quality for that affordability, as all home components are made to exacting standards that even some general contractors cannot match.

Popularity: 12% [?]

  • Share/Bookmark

New Homes Prefabricated to Your Specifications

Friday, July 9th, 2010

Are you in the market for a new home?  If so, then chances are good that you have been making the rounds and looking at existing homes for sale.  You might have even considered the price of custom built new homes.  Prefabricated homes may be a better choice for your needs, though.  Why is this?  How can prefabricated homes compare to site-built homes in terms of price and quality?  Actually, you might be surprised at some of the answers.

There are several ways that prefab homes outrank standard stick-built homes.  Prefabricated homes offer a much shorter construction time than a normal home.  This is because the wall sections arrive preassembled.  Preassembly means that you or your contractor can skip the time consuming process of cutting lumber and building each wall by hand.  All you have to do is move the wall into position and attach it.  Then you can move on to the next.  The work of several weeks can be accomplished in just a couple of days this way.

Why is it important that you are able to save time with these homes?  Prefabricated homes help ensure that you are able to get the roof up as soon as possible.  This keeps all of the other lumber out of the blistering sun and soaking rain, ensuring that it does not warp or shrink.  Water and sun damage can really do a number on wood, so it makes sense to get it under cover as quickly as possible.

Another reason that homes prefabricated to your specifications are a good investment is that they are made with green methods, from recycled or recyclable materials.  This helps you benefit the environment, while still getting the home that you want.  Green prefab homes are also longer lived than many stick-built homes, thanks to the greater precision with which the components are put together.

Popularity: 2% [?]

  • Share/Bookmark

Is Prebuilt Housing A Good Option for Your Home?

Friday, July 9th, 2010

Are you looking for a new home?  If so, then you might want to reconsider buying a cookie-cutter home in a subdivision.  Perhaps you are looking to add onto your home.  If so, there are better ways than hiring a standard contractor and then waiting for months for the project to be completed.  Prebuilt housing is a unique new option that offers homeowners and builders a number of significant advantages.  Is this choice right for your needs?

What should you know about prebuilt homes?  First, you will find that they are far more easily constructed than a traditional site built home.  Usually, the construction process is quite expensive, requires skilled labor and takes an enormous amount of time.  This is because every aspect of the home must be constructed on site, from different pieces of lumber.  However, prebuilt housing allows you to get around this problem.

This works because the manufacturer supplies prebuilt wall sections that are easily moved.  Once on the lot, the sections can be moved onto the floor and installed in just a few minutes.  Contrast this with the time-consuming process involved with building a home in the traditional way.

Simply building one wall section can take hours.  This adds up to a considerable amount of time over the course of construction.  In addition, when you make use of prebuilt home sections, you are able to get everything under a roof far more quickly, helping to prevent premature weathering, warping and other problems that can be caused by exposure.

Prebuilt housing options are great options for homeowners who want to build their home on their own, as well.  Because the sections arrive fully constructed, there is no need for in-depth construction knowledge.  The average homeowner can build their own home with a few friends or family members.

Popularity: 1% [?]

  • Share/Bookmark

Taking Advantage of Prebuilt Housing

Friday, May 28th, 2010

Prebuilt housing provides some real economic and time-saving advantages to the homeowner. First and foremost, there’s no need to design a home from scratch. When you consider what’s involved with such a project, it’s easy to see how prices quickly increase. It starts with having an architect design the home, of course, and continues on through the construction of the rough frame, the finishing elements and all the other associated parts of construction. With a prebuilt home, much of this hassle is eliminated and, with it, many of the expenses and delays associated with building your own house.

When you design a home from scratch, there’s a lot involved. To work with a contractor, you’ll need proper blueprints and, of course, this means that you’ll need to work with CAD programs or other complex computer software. For most people, this is entirely beyond their capabilities. Having it done for you is not cheap or fast in any regard. Prebuilt housing has all of the plans designed already. There is no mystery to how much is involved in constructing any given wall, nor is there any need for you to produce blueprints for the contractors.

Prebuilt housing also has the advantage of letting you set a concrete budget. A large part of the reason that construction projects run over budget or time quite a lot has to do with the sheer amount of planning and logistics involved in constructing a home from scratch. With a prebuilt design, it’s easy to figure out how much the total supplies bill will be as there is a known quantity involved with every aspect of the home. The plans are made already, the building process is understood in terms of time and supplies and, thus, there is no guesswork or mystery involved.

Popularity: 12% [?]

  • Share/Bookmark

Is Prefab Housing Attractive?

Friday, May 28th, 2010

It’s pretty easy to confuse all prefab housing with the worst examples on the market. Usually, consumers will assume that any prefab housing product means that their house will be essentially identical to what they see in the most aesthetically dull tract housing developments. This is not necessarily the case. Prefabricated housing oftentimes encompasses those parts of the home that are generally the same from structure to structure and that can be manufactured more efficiently in large numbers than they can be separately. There are some distinct advantages to these products that make them attractive to consumers.

Prefab housing is easily erected by most people with do-it-yourself level carpentry skills. The hardest parts of the structure to craft, including the walls and other elements, are delivered already manufactured. They’re designed to fit with one another at the factory and that makes putting them up orders of magnitude easier than it would be were you creating these parts of your house from scratch. Essentially, the rough framing for your home is delivered on a truck and you have only to assemble it to get the project underway. This can save quite a lot of money in a variety of ways.

Prefab housing allows contractors to work in a protected area as quickly as possible, given the impressive speed that the rough framing can be put up. This, of course, means that they’re able to get the rest of your home constructed much more quickly and that you don’t have to pay them for the rough framing work, which can be very expensive. It also means that you don’t have to worry about supply shortages or under or over ordering materials. Everything is ready to be assembled from the start and is engineered to have a perfect fit.

Popularity: 2% [?]

  • Share/Bookmark

Considerations for when you Build your own House

Friday, May 28th, 2010

One of the most exciting things that you can do is to build your own house. Initially, you’ll probably take plenty of flights of fancy as to what you’re going to build. You may be thinking of something completely environmentally friendly or you may be thinking of a huge mansion. There will be considerations that are universal, the size of the structure notwithstanding. One of these considerations will have to do with the rough framing of the home, which is the process of putting up all the most basic elements of the house, including the floor, walls and roof.

When you build your own house, you’re taking on more than a carpentry challenge. Most contractors have individuals whose sole occupation is to order supplies as they are needed. Oftentimes, they have to track down needed supplies and delays can be costly for the contractor and their client. This oftentimes throws new homebuilders for a loop. The complexities are very real and taking a house from blueprint to construction requires a lot of logistical work. If you consider it, there’s a lot of work involved in figuring out how many feet of wood you need to build even a simple structure.

Prefabricated elements provide a good way to eliminate a lot of the logistical complexity involved when you build your own house. The parts, such as the walls, floors, and so forth, are already constructed, being put together in a factory. This means there’s no guesswork to figuring out how much lumber, how many nails and what quantity of other supplies are needed. Using prefabricated parts, it’s much easier to construct a home of your own. It also eliminates the hazards associated with constructing the most essential structural elements on your own.

Popularity: 4% [?]

  • Share/Bookmark

Are Prefab House Prices Worth It?

Wednesday, May 26th, 2010

Prefab house prices, on the whole, are usually much lower than is the cost of custom construction. Even though this is the case, any homeowner has a right to know why they’re paying as much as they are for a home, even if they’re paying less than they might expect. While prefabricated dwellings are usually much more affordable than building to suit, it’s not because these homes are lacking in any regard. In fact, despite the reduced price, homeowners come out ahead in several ways where prefab homes are concerned.

Prefab house prices are much more predictable than custom construction. This is because there is a set price on the quantity of materials needed. There is also an accurate price for the time involved in construction and the materials are kept out of the elements, eliminating waste. These aspects of prefabricated housing all speak to the efficiency of the concept and to how that efficiency can be to the advantage of the homeowner. It also helps illustrate how these homes are environmentally sound, as there is very little waste associated with their construction. The process of constructing these homes is very well-planned and cost-controlled.

Another element that keeps prefab house prices affordable is the fact that there is a predictable time frame for delivery. Oftentimes, custom building jobs run over budget or time limits and, because of that, the homeowner is stuck with another bill that they didn’t expect. There is also the possibility that needed supplies will be backordered, and that can hold up a construction project for a very long time. Where prefab housing is concerned, it is both the efficiency and the fact that the process is a known quantity in terms of price and materials that make it worth every penny.

Popularity: 44% [?]

  • Share/Bookmark